Today President Obama signed an executive order aimed at increasing investment in industrial energy efficiency. The order, titled "Accelerating Investment in Industrial Energy Efficiency" (see official text at whitehouse.gov), directs the federal government to take a series of steps furthering this goal. At stake is the competitiveness of U.S. industry; according to the accompanying press release, the efforts called for in the executive order could save manufacturers as much as $100 billion in energy costs over the next ten years.
Combined heat and power (CHP), or cogeneration, represents the efficient use of fuels to produce both electricity and useful heat. In a traditional non-CHP electric generation station like a coal-fired power plant, a fuel is burned to boil water into steam; the steam is then used to spin a turbine connected to an electrical generator. These traditional systems do produce electricity, but much of the energy content of the fuel being burned is wasted as heat released to the air or cooling water.
CHP systems are designed to recover heat that normally would be wasted in an
electricity generator, and save the fuel that would otherwise be used
to produce heat or steam in a separate unit. The Obama administration believes that the efficient production of heat and electricity can improve the
competitiveness of United States manufacturing, lower energy costs,
free up future capital for businesses to invest, reduce air pollution,
and create jobs.
According to the U.S. Clean Heat and Power Association, the nation is home to about 82 gigawatts of installed CHP. These systems currently supply about 12% of U.S. generating capacity. The USCHPA cites industry
estimates that the technical potential for additional CHP at
existing sites in the U.S. is approximately 130 GW, plus an additional
10 GW of waste heat recovery CHP.
Today's executive order directs an array of federal executive departments and agencies to convene stakeholder groups to identify, develop, and encourage the adoption of investment models and State best practice policies for industrial energy efficiency and CHP; provide technical assistance to States and manufacturers to encourage investment in industrial energy efficiency and CHP; educate the public on the benefits of investment in industrial energy efficiency and CHP; and use existing authorities to support investment in industrial energy efficiency and CHP.
The order also sets a new national goal of 40 gigawatts of new combined heat and
power capacity by 2020. According to the White House, meeting this goal would save energy users $10 billion per year, result in $40 to $80 billion in new capital investment in manufacturing and other facilities that would create American jobs, and would reduce emissions equivalent to 25 million cars.
Electricity can be transmitted long distances over transmission lines, but heat generally must be used relatively locally -- either at the site where it is produced, or at a nearby site connected by steam or other piping. Because CHP works at sites with significant heat demands, much of the growth in CHP resulting from today's order will likely be at manufacturing facilities and other industrial sites.
Energy powers society; society's choices shape energy policy. A blog about our energy resources and the choices they present for society.
Hurricane Isaac disrupts Gulf energy production
Tuesday, August 28, 2012
Hurricane Isaac has already disrupted energy production in the Gulf of Mexico -- and is likely to cause further damage when it makes landfall late tonight or tomorrow morning.
As I noted yesterday, the storm's path across the Gulf as Tropical Storm Isaac has already caused most oil and natural gas producers in the Gulf to shut in their wells; temporarily halting the production of these fuels from the Gulf. As of yesterday, producers had shut in 78% of Gulf oil production and 48% percent of natural gas production. Data released today by the federal Bureau of Safety and Environmental Enforcement shows about 93.28% of the current daily oil production in the Gulf of Mexico has been shut-in, as has about 66.7% of the current daily natural gas production in the Gulf.
Offshore hydrocarbon resources in the Gulf of Mexico play a significant role in U.S. fuel production. According to the U.S. Energy Information Administration (EIA), about 23% of all U.S. crude oil production comes from the Gulf, as does about 7% of U.S. dry natural gas production.
Subject to tropical storms and hurricanes, Gulf oil and gas production is periodically interrupted due to severe weather. For example, EIA data shows that at its peak, 2005's Hurricane Katrina caused producers to shut in 539,074 barrels of oil production per day -- about half the amount of shut-in production as Tropical Storm Isaac caused yesterday. EIA data also shows that up to 3,228 cubic feet per day of natural gas production was shut in as a result of Katrina, or about one-and-a-half times as much gas per day as has been shut in due to Isaac so far. Four months after Katrina hit, 2,155 oil and gas wells, or 36.2 percent of the wells in the region, reportedly remained shut-in and incapable of producing. Understanding the full comparative impact of these storms will require knowing when the production shut-in by Isaac can come back online, but it is clear that Hurricane Isaac is a force to be reckoned with.
Previous storms, such as Hurricane Katrina, also caused significant damage to onshore energy infrastructure like oil refineries. At its peak, Katrina reportedly caused 4.5 million barrels per day of refining capacity to be shuttered; four months later, refinery shutdowns in the Gulf of Mexico region still totaled 367,000 barrels per day.
In preparation for Hurricane Isaac's landfall, several large Gulf Coast refineries have announced closures, with estimates suggesting a total of 1.1 million barrels per day of shutdown refining capacity or about half of the refining in the storm's path. While Isaac is expected to remain a Category 1 hurricane, and thus may pack less of a punch than Category 3 Katrina, Isaac's impending landfall comes swiftly on the heels of a significant refinery explosion and fire in Venezuela. Consumers can expect gasoline prices to trend higher in the near term.
As I noted yesterday, the storm's path across the Gulf as Tropical Storm Isaac has already caused most oil and natural gas producers in the Gulf to shut in their wells; temporarily halting the production of these fuels from the Gulf. As of yesterday, producers had shut in 78% of Gulf oil production and 48% percent of natural gas production. Data released today by the federal Bureau of Safety and Environmental Enforcement shows about 93.28% of the current daily oil production in the Gulf of Mexico has been shut-in, as has about 66.7% of the current daily natural gas production in the Gulf.
Offshore hydrocarbon resources in the Gulf of Mexico play a significant role in U.S. fuel production. According to the U.S. Energy Information Administration (EIA), about 23% of all U.S. crude oil production comes from the Gulf, as does about 7% of U.S. dry natural gas production.
Subject to tropical storms and hurricanes, Gulf oil and gas production is periodically interrupted due to severe weather. For example, EIA data shows that at its peak, 2005's Hurricane Katrina caused producers to shut in 539,074 barrels of oil production per day -- about half the amount of shut-in production as Tropical Storm Isaac caused yesterday. EIA data also shows that up to 3,228 cubic feet per day of natural gas production was shut in as a result of Katrina, or about one-and-a-half times as much gas per day as has been shut in due to Isaac so far. Four months after Katrina hit, 2,155 oil and gas wells, or 36.2 percent of the wells in the region, reportedly remained shut-in and incapable of producing. Understanding the full comparative impact of these storms will require knowing when the production shut-in by Isaac can come back online, but it is clear that Hurricane Isaac is a force to be reckoned with.
Previous storms, such as Hurricane Katrina, also caused significant damage to onshore energy infrastructure like oil refineries. At its peak, Katrina reportedly caused 4.5 million barrels per day of refining capacity to be shuttered; four months later, refinery shutdowns in the Gulf of Mexico region still totaled 367,000 barrels per day.
In preparation for Hurricane Isaac's landfall, several large Gulf Coast refineries have announced closures, with estimates suggesting a total of 1.1 million barrels per day of shutdown refining capacity or about half of the refining in the storm's path. While Isaac is expected to remain a Category 1 hurricane, and thus may pack less of a punch than Category 3 Katrina, Isaac's impending landfall comes swiftly on the heels of a significant refinery explosion and fire in Venezuela. Consumers can expect gasoline prices to trend higher in the near term.
Tropical Storm Isaac threatens energy production in Gulf
Monday, August 27, 2012
Tropical Storm Isaac is bearing down on the U.S. Gulf Coast -- and whether or not it becomes Hurricane Isaac, the storm is already impacting energy production across the Gulf of Mexico.
Isaac is currently about 300 miles south of the mouth of the Mississippi River and is expected to become a hurricane before reaching the northern Gulf Coast late Tuesday. Concern over human and environmental safety has led oil and gas production and drilling companies to pull their personnel off remote structures in the Gulf. According to the federal Bureau of Safety and Environmental Enforcement or BSEE, personnel have been evacuated from 346 production platforms across the Gulf of Mexico -- more than half of the 596 manned platforms in the Gulf. Personnel have also been evacuated from 41 out of the 76 exploration and drilling rigs currently operating in the Gulf.
When production platforms and drilling rigs are evacuated, companies are required to close safety valves located below the surface of the ocean floor to prevent the release of oil or gas. This "shut-in" process is designed to protect the environment, but it has obvious consequences for the production of energy resources like oil and gas. The BSEE estimates that 1,076,642 barrels of oil production per day has been shut-in as a result of Isaac (about 78.02 percent of the current daily oil production in the Gulf of Mexico), as has 2,165.94 million cubic feet per day of natural gas production (about 48.13 percent of the current daily natural gas production in the Gulf).
Provided the storm leaves Gulf production and drilling assets unharmed, these platforms and rigs may resume operations after the storm has passed (and after they have passed inspection). But the disruption to offshore petroleum and natural gas production will already have affected the markets, driving short-term prices upward.
Particularly if it intensifies into Hurricane Isaac, Tropical Storm Isaac may also damage onshore energy assets, ranging from local electric distribution lines to major transmission lines, and from distributed generation projects like rooftop solar panels to utility-scale nuclear or other power plants. Wind, rain, flooding, and a significant storm surge of 6 to 12 feet are all expected for southeast Louisiana, Mississippi, and Alabama.
NOAA forecasts call for the storm to have passed New Orleans by Thursday, by which time the extent of any damage may begin to be apparent -- and the process of restoration and recovery will begin.
 |
| Satellite image of Tropical Storm Isaac, courtesy of the U.S. National Oceanic and Atmospheric Administration (NOAA). |
Isaac is currently about 300 miles south of the mouth of the Mississippi River and is expected to become a hurricane before reaching the northern Gulf Coast late Tuesday. Concern over human and environmental safety has led oil and gas production and drilling companies to pull their personnel off remote structures in the Gulf. According to the federal Bureau of Safety and Environmental Enforcement or BSEE, personnel have been evacuated from 346 production platforms across the Gulf of Mexico -- more than half of the 596 manned platforms in the Gulf. Personnel have also been evacuated from 41 out of the 76 exploration and drilling rigs currently operating in the Gulf.
When production platforms and drilling rigs are evacuated, companies are required to close safety valves located below the surface of the ocean floor to prevent the release of oil or gas. This "shut-in" process is designed to protect the environment, but it has obvious consequences for the production of energy resources like oil and gas. The BSEE estimates that 1,076,642 barrels of oil production per day has been shut-in as a result of Isaac (about 78.02 percent of the current daily oil production in the Gulf of Mexico), as has 2,165.94 million cubic feet per day of natural gas production (about 48.13 percent of the current daily natural gas production in the Gulf).
Provided the storm leaves Gulf production and drilling assets unharmed, these platforms and rigs may resume operations after the storm has passed (and after they have passed inspection). But the disruption to offshore petroleum and natural gas production will already have affected the markets, driving short-term prices upward.
Particularly if it intensifies into Hurricane Isaac, Tropical Storm Isaac may also damage onshore energy assets, ranging from local electric distribution lines to major transmission lines, and from distributed generation projects like rooftop solar panels to utility-scale nuclear or other power plants. Wind, rain, flooding, and a significant storm surge of 6 to 12 feet are all expected for southeast Louisiana, Mississippi, and Alabama.
NOAA forecasts call for the storm to have passed New Orleans by Thursday, by which time the extent of any damage may begin to be apparent -- and the process of restoration and recovery will begin.
Hospital energy use in focus
Friday, August 24, 2012
Hospitals provide essential services to society - but many hospitals consume large amounts of energy in fulfilling their mission. Newly released data shows that large hospitals tend to consume more energy per square foot than do other commercial buildings.
The data released by the U.S. Energy Information Administration last week comes from the 2007 Commercial Buildings Energy Consumption Survey (CBECS). While 2007-vintage data may seem a bit stale in 2012, the 2007 survey results are the most recently-released from the CBECS program, providing an update to the 2003 survey. The survey considered the consumption of electricity, natural gas, fuel oil, and district heat (steam or hot water from an outside source used for heating) by a variety of types of commercial buildings.
According to EIA, the roughly 3,040 large hospitals operating in 2007 - defined as those over 200,000 square feet - consumed 458 trillion British thermal units (Btu) of energy in that year. Of this total energy budget, most came in the form of natural gas and electricity: 208 trillion Btu of natural gas, 194 trillion Btu of electricity, 6
trillion Btu of fuel oil, and 49 trillion Btu of district heat.
Altogether, large hospitals consumed about 5.5% of the commercial sector's total energy consumption in 2007. On a Btu per square foot basis, the EIA data suggests that large hospitals' energy intensity exceeds that of other commercial building types, with large hospitals accounting for only 2% of commercial floorspace in 2003.
This energy intensity may not be surprising: hospitals are typically open around the clock, have high demands for heating,
ventilation, and air conditioning, and are home to a variety of energy-intensive activities ranging from laundry and food service to sterilization and computer servers. Hospitals' need for a high degree of electric service reliability have led 95% of large hospitals to use energy for generating their own electricity, mostly in the form of fuel oil-fired emergency back-up generation.
At the same time, most hospitals' consciousness about their energy footprint has led them to pursue energy efficiency. The EIA data shows that most large hospitals have energy management and conservation plans, and use energy-saving products like compact fluorescent lights or sophisticated services to reduce their consumption of electricity.
Still, the EIA data suggests that large hospitals still have room for improvement. What more can hospitals do to reduce their energy footprint and its associated costs, while continuing to provide the services society demands?
FERC issues wave energy license
Monday, August 20, 2012
Federal energy regulators have issued a license to a wave energy project off the Oregon coast. If built as proposed, the project could be the first grid-tied commercial-scale wave energy project in U.S. waters.
Last week the Federal Energy Regulatory Commission issued a license (76-page PDF) to Reedsport OPT Wave Park, LLC for the ocean energy project. In its license application filed in January 2010, the Ocean Power Technologies, Inc. subsidiary proposed a buoy-based wave energy conversion project to be located about 2.5 nautical miles off the coast of Reedsport, in Douglas County, Oregon. Water depths in the project area range from about 204 to 225 feet.
According to the FERC order issuing the project's license, the project will generate electricity from using ten PowerBuoy wave energy converters anchored to the seafloor. Each buoy will have a 150 kilowatt nameplate capacity; physically, each buoy has a maximum diameter of 36 feet, extends 29.5 feet above water, and has a draft of 115 feet.
The marine renewable energy project will be built in two phases. In the first phase, a single PowerBuoy will be installed; this will enable the developer to test the mooring system and buoy operation, as well as to study the electromagnetic fields and acoustic emissions produced by the project. This single buoy will not be connected to the grid. After at least one season of monitoring this single buoy, the developer will add up to nine additional PowerBuoys and connect the array to the mainland grid. The ten buoy units will be deployed in an array of three rows about 330 feet apart, with a footprint of about 30 acres.
The developer reportedly expects to install the first buoy by the end of 2012, with the remaining generators to be installed by 2015. FERC's license for the project has a term of 35 years.
 |
| A sailboat cruises past the Bear Island Lighthouse near Northeast Harbor, Maine. |
According to the FERC order issuing the project's license, the project will generate electricity from using ten PowerBuoy wave energy converters anchored to the seafloor. Each buoy will have a 150 kilowatt nameplate capacity; physically, each buoy has a maximum diameter of 36 feet, extends 29.5 feet above water, and has a draft of 115 feet.
The marine renewable energy project will be built in two phases. In the first phase, a single PowerBuoy will be installed; this will enable the developer to test the mooring system and buoy operation, as well as to study the electromagnetic fields and acoustic emissions produced by the project. This single buoy will not be connected to the grid. After at least one season of monitoring this single buoy, the developer will add up to nine additional PowerBuoys and connect the array to the mainland grid. The ten buoy units will be deployed in an array of three rows about 330 feet apart, with a footprint of about 30 acres.
The developer reportedly expects to install the first buoy by the end of 2012, with the remaining generators to be installed by 2015. FERC's license for the project has a term of 35 years.
MA net metering expands under new law
Tuesday, August 14, 2012
Massachusetts legislation signed into law earlier this month provides a variety of incentives for renewable generation in the northeastern US and adjacent Canadian provinces. Senate Bill 2395, An Act relative to competitively priced electricity in the Commonwealth, expands opportunities for net metering, a practice whereby electricity consumers can spin their meters backwards and offset the cost of electricity they buy by producing renewable power themselves.
Under existing Massachusetts law, qualified retail electricity customers who own distributed power generation equipment like solar photovoltaic panels have the right to sell excess power to their local utility at the same retail rates the customers pay to buy power from the utility. In essence, this allows customers to offset their utility bills for purchasing power by producing more power than the customer needs. This can be a powerful incentive for customers to develop distributed generation projects, because the retail rates utilities must pay for net metered power are typically higher than the wholesale rates otherwise available to distributed generators.
To limit the size of this incentive, previous law capped net metering to 3% of each utility's historic peak energy load. Privately-owned equipment like solar panels on businesses or homes was capped at 1% of historic peak load, while publicly-owned facilities (schools, governmental buildings, etc.) were capped at 2%.
The new law doubles the amount of consumer-owned generation eligible for net metering, raising the private and public caps to 3% each. This amounts to a tripling of the amount of privately-owned distributed generation eligible for net metering.
The law also allows anaerobic digestion to qualify for net metering. This expansion of eligible technologies is likely to spur the expansion of projects that convert food, farm, and other organic waste to biogas for combustion in engines or turbines connected to electric generators.
As I noted yesterday, the new law also more than doubles the amount of renewable electricity that utilities must purchase from independent generators through long-term power purchase agreements.
Under existing Massachusetts law, qualified retail electricity customers who own distributed power generation equipment like solar photovoltaic panels have the right to sell excess power to their local utility at the same retail rates the customers pay to buy power from the utility. In essence, this allows customers to offset their utility bills for purchasing power by producing more power than the customer needs. This can be a powerful incentive for customers to develop distributed generation projects, because the retail rates utilities must pay for net metered power are typically higher than the wholesale rates otherwise available to distributed generators.
To limit the size of this incentive, previous law capped net metering to 3% of each utility's historic peak energy load. Privately-owned equipment like solar panels on businesses or homes was capped at 1% of historic peak load, while publicly-owned facilities (schools, governmental buildings, etc.) were capped at 2%.
The new law doubles the amount of consumer-owned generation eligible for net metering, raising the private and public caps to 3% each. This amounts to a tripling of the amount of privately-owned distributed generation eligible for net metering.
The law also allows anaerobic digestion to qualify for net metering. This expansion of eligible technologies is likely to spur the expansion of projects that convert food, farm, and other organic waste to biogas for combustion in engines or turbines connected to electric generators.
 |
| An anaerobic digester located on a farm in New England. The digester breaks organic waste down into biogas that can be used to produce renewable electricity. |
As I noted yesterday, the new law also more than doubles the amount of renewable electricity that utilities must purchase from independent generators through long-term power purchase agreements.
Massachusetts increases renewable energy incentives
Monday, August 13, 2012
Energy legislation signed by Massachusetts Governor Deval Patrick earlier this month creates new opportunities for renewable energy projects in New England.
Finally enacted as Senate Bill 2395, the bill titled "An Act relative to competitively priced electricity in the Commonwealth" (37-page PDF) represents a combination of legislative proposals offered during the 2012 session. The Act expands opportunities for renewable energy and energy efficiency, while seeking to manage increases in the cost of energy to consumers.
A number of the Act's provisions improve opportunities for renewable electricity production in Massachusetts and other New England states. Building on the Green Communities Act of 2008, the new law increases the amount of electricity that electric distribution companies may purchase from renewable generating facilities under long-term contracts. Previous law had required utilities to procure up to 3% of their electricity through long-term power purchase agreements with independent renewable energy developers.
The 2012 act amends the Green Communities Act by requiring distribution companies to solicit 10 to 20-year power purchase agreements from renewable developers for up to an additional 4% of the utilities' annual load. By the end of 2016, the Commonwealth's distribution companies will conduct two rounds of joint solicitations for the new contracts. Unlike previous renewable PPA negotiations such as led utility National Grid to select offshore wind developer Cape Wind as a renewable energy supplier, the new contracts must be negotiated through a competitive bid process.
The new law also provides a boon for distributed generation, requiring 10% of the newly-mandated supply to come from newly developed, small, emerging or diverse renewable energy distributed generation facilities located in its service territory. Standards for these distributed generation projects require a maximum project capacity no greater than 6 megawatts. Eligible distributed generation projcts cannot be net metering facilities, and must rely on a technology with no more than 30 megawatts of installed capacity in Massachusetts as of April 2012.
Under the Massachusetts renewable portfolio standard, projects eligible for this incentive may be built in any New England state, New York, or eastern Canada.
Finally enacted as Senate Bill 2395, the bill titled "An Act relative to competitively priced electricity in the Commonwealth" (37-page PDF) represents a combination of legislative proposals offered during the 2012 session. The Act expands opportunities for renewable energy and energy efficiency, while seeking to manage increases in the cost of energy to consumers.
A number of the Act's provisions improve opportunities for renewable electricity production in Massachusetts and other New England states. Building on the Green Communities Act of 2008, the new law increases the amount of electricity that electric distribution companies may purchase from renewable generating facilities under long-term contracts. Previous law had required utilities to procure up to 3% of their electricity through long-term power purchase agreements with independent renewable energy developers.
The 2012 act amends the Green Communities Act by requiring distribution companies to solicit 10 to 20-year power purchase agreements from renewable developers for up to an additional 4% of the utilities' annual load. By the end of 2016, the Commonwealth's distribution companies will conduct two rounds of joint solicitations for the new contracts. Unlike previous renewable PPA negotiations such as led utility National Grid to select offshore wind developer Cape Wind as a renewable energy supplier, the new contracts must be negotiated through a competitive bid process.
The new law also provides a boon for distributed generation, requiring 10% of the newly-mandated supply to come from newly developed, small, emerging or diverse renewable energy distributed generation facilities located in its service territory. Standards for these distributed generation projects require a maximum project capacity no greater than 6 megawatts. Eligible distributed generation projcts cannot be net metering facilities, and must rely on a technology with no more than 30 megawatts of installed capacity in Massachusetts as of April 2012.
Under the Massachusetts renewable portfolio standard, projects eligible for this incentive may be built in any New England state, New York, or eastern Canada.
Subscribe to:
Posts (Atom)
